DIY Cam Clamp Kit / CNC Luthier Clamp

00:02 Cutting 4x20mm flat bar.
00:17 CNC’ing the two halves of the cam clamps.
00:43 Gluing and nailing sections of fixed pieces.
01:24 Drilling through metal bar for fixed section.
01:40 I am using M4 split or spring pins, which get hammered in.
02:20 Gluing and nailing the movable bit of the cam clamp.
02:42 Hammering split pins with closed face towards bar.
02:55 Installing cam.
03:02 Giving the clamp a hand sand.
03:11 TEST
03:44 Adding cork to clamping surfaces.

Leave a Reply