I’d like to see which I think could be achieved by editing the web interface:
- Change from mm/sec to mm/min on movement description.
- The Work Coordinate Selection to also specify the g-code which they referred too e.g 1=G42, 2=G55, etc.
- Right click editing of the Set X, Y, Z, and GOTO Work XYZ Zero buttons to change or cater their functions.
- Macro short-cuts in the dashboard.
- RPM speed slide bar for in job spindle speed editing.
- Live view of job progress, or a visual simulation window of g-code which can be used before starting a job.
Any chance you could share your macros?
I’ve shared a little more from my config file and set up in later videos. Have a look for the one where I set up LED lights on the Duet.